Risco PoE 4MP Dome Camera

Note This camera can only be connected to RISCO Cloud via VUpoint NVR.

Step 1 Connect one end of the network cable (LAN) to the camera's Ethernet port and the other side to your router or an NVR PoE port. If the camera is not connected to PoE, power it with a suitable power supply.

Step 2 Used VUpoint NVR- the instructions to connect the camera to the NVR with “RISCO Pro“ camera type.

Product specification
Image sensor 1/3” 4 Megapixel progressive CMOS
IR Distance 30 m
Focal length 2.8 mm
WDR 120dB
Firmware upgrade Via the camera's web interface
Power supply 12V DC/POE
Power consumption <4.9W
Operating conditions -40°C to 55°C (-40°F to 131°F)/ less than ≤ 95%
Storage temperature -40°C to 60°C (-40°F to 140°F)
Protection IP67