Battery backup 12V 3A for CCTV cameras – SPF-12V-3A
SPF-12V-3A is a 12V DC UPS specially designed for CCTV systems, where multiple cameras need a stable and secure power supply – even during power outages.
The UPS has four separate DC outputs, where each output is individually secured, which provides high operational reliability and protects both cameras and cabling in the event of a fault or short circuit on an individual channel.
In the event of a power failure, the device automatically switches to battery operation via an external 12V/7Ah battery, so that cameras and peripherals continue to function without interruption.
Clear LED indicators shows:
-
AC mains voltage
-
DC output
-
Battery charging
-
Low battery voltage
Battery backup 12V 3A for CCTV is equipped with protection against short circuit, overcurrent, overcharge and deep discharge, with automatic reset when the fault disappears.
Features and benefits
-
Specially adapted for CCTV cameras
-
4 individually fused DC outputs
-
Automatic battery operation in case of power failure
-
Max total load: 3A
-
LED status for easy monitoring
-
Protection against electrical and battery failures
-
Stable solution for professional camera installations
Technical specifications
-
Entrance: 100–240V AC, 50/60Hz
-
Max output current: 3.0A (total)
-
Battery charging: 0.8A
-
Outputs: 4 × DC, individually fused
-
Recommended battery: 12V / 7Ah (not included)
-
Temperature: -20 to +45°C
-
Humidity: Up to 90 % (non-condensing)
-
Mounting: Indoor, wall
-
Certification: CE
Typical uses
-
CCTV cameras (analog & IP via 12V)
-
Small and medium-sized camera systems
-
NVR/DVR with external power supply
-
Safety installations where multiple loads require separate fuses
Installation
Intended for indoor installation.
The UPS is mounted on the wall and connected via terminal blocks.
Installation is recommended to be carried out by authorized technician, especially with multi-channel camera systems.
Size: 195 x 225 x 83 mm











