Risco Eyeball 4MP Varifocal PoE Network Camera

PoE Camera Settings

Note:
This camera can only be connected to RISCO Cloud via VUpoint NVR.

Step 1:
Connect one end of the network (LAN) cable to the camera's Ethernet port and the other end to your router or an NVR PoE port. If the camera is not connected to PoE, power it with a suitable power supply.

Step 2:
Use the VUpoint NVR instructions to connect the camera to the NVR with the “RISCO Pro” camera type.

Product specification

Parameters Description:
– Image sensor: 1/3” 4Megapixel progressive CMOS
– IR Distance: 50 m
– Focal length: 2.8 – 12 mm
– WDR: 120dB
– Firmware upgrade: Via the camera's web interface
– Power supply: 12V DC/POE
– Power consumption: <6.9W
– Operating conditions: -30°C to 60°C (-22°F to 140°F)/ less than ≤ 95%
– Storage temperature: -40°C to 60°C (-40°F to 140°F)
– Protection: IP67