Engine lock housing EL874 Right

ABLOY motor lock EL874 / EL875 is available in two variants EL874 with pressure drop can be used in fire cell boundary EL875 without pressure drop can be used in doors with door automation each motor lock requires a control unit (EA453) which manages the communication between the motor lock and the outside world.

• The lock Opening time approx. 0.7 seconds
• The lock can always be opened with a key / emergency handle 
• Built-in door position sensor (magnet), which can be replaced by an external magnet 
• Pressure drop, fire-retardant up to E/EI60 (EL874) 
• Adapted for door automation (EL875) 
• Hold time 2 – 15 seconds 
• Approved emergency evacuation together with 179C 
• Is certified and CE-marked according to the requirements of the European standard SS-EN179 and the Construction Product Directive 89/106/EEC.
• If the re-housing function has been activated, the lock is reset electrically with an external reset button. 

• Functions as an interface to the outside world, e.g. access or alarm systems 
• Communicates with the engine lock  
• Requires control signals from parent system to operate engine lock  
• Provides indications to the superior system that tell the status of the lock and the door  
• Connects to voltage supply  
• Can be completed with a backup card that locks everything. unlocks in case of power failure. 
•  ATTENTION! Backup card alone is NOT a certified emergency or panic evacuation feature. 
•  Must be installed indoors on the protected side of the door within 15m of the motor lock 

Technical data 

• Voltage: 12 – 24 VDC ± 15 %, 12-18 VAC – 10 % / + 15 %
• Current: 12 VDC rest 70 mA, max 300 mA, 
• Current: 24 VDC rest 35 mA, max 150 mA
• Relays: Single-pole switching Max. 30 VDC, 0.8 A
• Connection cable: EA224 10 m, max. distance between motor lock and control unit 15 m
• Door gap: max. 5 mm