Solo 11 Test Kit – 7.3 m (Heat / Smoke) – Carrying Cases

Complete test kit for smoke and heat detectors

Solo 11 is designed for safe and efficient testing of smoke and heat detectors up to approximately 7.3 m.

The kit combines telescopic poles and extensions with test equipment and practical carrying cases, making transport and use on the jobsite easy.

Contents of Solo 11

• Detector tester Solo 330 – tests smoke and CO detectors, compatible with Solo A5 and Solo C3 test gas cylinders.

• Heat detector tester Solo 461 – battery-powered for testing heat detectors.

• Telescopic pole Solo 108 – 2.5 m, fiberglass, non-electrically conductive, light and stiff.

• 3 × Extension rods Solo 101 – 1.13 m each, can be connected together for higher height.

• Carrying case + quiver Solo 610 – practical for transporting and storing the equipment.

• 3 × Solo A5 test gas bottles – smoke test, enough for about 400 tests per bottle.

Easy and safe use

1. Mount Solo 330 or Solo 461 on Solo 108 and any Solo 101 poles for desired height.

2. Shake the Solo A5 test gas bottle and install it in the tester.

3. Place the cup around the detector, press lightly and let the gas flow out.

4. Wait approximately 10 seconds until the detector sounds an alarm; repeat if necessary.

Advantages of Solo 11

• Reach up to 7.3 m

• Compact and portable with Solo 610 case

• Tests both smoke and heat detectors as well as CO detectors

• Easy assembly and handling of rods and testers

Technical specifications

• Test height: up to 7.3 m

• Contents: Solo 330, Solo 461, Solo 108, 3 × Solo 101, Solo 610, 3 × Solo A5

• Rod material: Fiberglass, non-electrically conductive

• Test gas bottle capacity: approx. 400 samples/bottle

• Compatible with: Solo and Testifire testers