Test kit Solo 4 – 4 m – Testing Smoke

Complete test kit for smoke detectors up to 4 m

Solo 4 is a complete test kit with Solo 108 telescopic pole, Solo 330 test gas holder and three Solo A5 (formerly Solo A3) test gas cylinders, designed for monthly and quarterly testing of smoke detectors in fire alarm systems.

The kit provides easy access to medium-height ceilings without the need for a ladder.

Telescopic pole Solo 108

Made of lightweight and rigid fiberglass material, non-conductive, making it stable when testing at higher altitudes. Solo 108 can be combined with 1–3 Solo 101 for a total testing height of up to approximately 7.3 m.

Fits Solo and Testifire testers and takedown testers.

Test gas holder Solo 330

The Solo 330 is used for functional testing of smoke and CO detectors with a diameter of up to 100 mm. The pivoting cup makes it possible to test detectors that are not perpendicular to the floor or that are difficult to reach directly from below.

Solo A5 test gas cylinders produce realistic smoke that activates both optical and ionization smoke detectors. One cylinder is sufficient for approximately 400 tests.

Easy to use

1. Shake the Solo A5 bottle and mount it in the tester.

2. Screw the container back on and turn ¼ turn.

3. Place the cup around the detector, press lightly against the ceiling and let the gas flow out for 1 second.

4. Wait approximately 10 seconds until the detector sounds an alarm. Repeat the short test if necessary.

5. The gas evaporates quickly and the detector can be reset immediately.

Advantages of Solo 4

• Complete kit with 3 test gas cylinders for multiple tests

• Lightweight and robust telescopic pole made of fiberglass

• Pivotable tester for hard-to-reach detectors

• Range up to 4 m (can be combined with Solo 101 up to 7.3 m)

• Fits most brands of smoke detectors

• Easy and safe use with quick recovery

Transport

The kit can be organized in the Solo 610 storage case with space for rods, testers and test gas cylinders, simplifying transport and protecting the equipment.

Technical specifications:

• Product: Solo 4 test kit

• Contents: Telescopic pole Solo 108, Test gas holder Solo 330, 3 test gas bottles Solo A5

• Range: Up to 4 m (can be combined with Solo 101 up to 7.3 m)

• Telescopic pole material: Fiberglass, non-electrically conductive

• Application: Functional testing of smoke detectors (optical and ionizing)

• Capacity per test gas cylinder: approx. 400 tests

• Compatible with: Solo and Testifire testers, Solo takedown testers