Test kit Testifire 2 – 2.7 m (Heat / CO / Smoke)

Test kit with Testifire 2001 and Solo 101 For test height approx. 2.7 m.

Detector tester Testifire 2001 for smoke, CO and heat detectors

Heat is generated through a heating element and a fan that blows the air from the side into the detector being tested.

Smoke is generated from the cartridge when a glycerol gel is heated. This type of smoke is the closest we can get to real fire smoke without burning!

CO (carbon monoxide) is generated with the help of a carbon-treated belt that is heated.

Test rod extender - Solo 101

Test rod extension of 1.13 m. Solo 101 is an extension rod that is made of a high-quality, non-electrically conductive fiberglass material. It is both light and stiff, which facilitates high testing heights. The various Solo tools can be easily mounted on top of this extender.

How is Solo 101 used?

1-3 pcs. Solo 101 can be mounted on top of each other and they can also be assembled with either Solo 108 or Solo 100 for a total testing height of approx. 7.3 m or approx. 9.3 m.

Extension rod Solo 101 is used together with our other test equipment and takedowns.

The following equipment can be used:

• CO and Smoke Detector Tester Solo 330 and Solo 332 (model for larger detectors)
• heat detector testers Solo 461 and Solo 424
• detector remover Solo 200
• universal tester Testifire 1001 and Testifire 2001

The units above are mounted on the test bar simply by sliding the unit into the test bar until it clicks and it automatically locks securely. To separate unit and test rod, the locking button is pushed in and the unit is pulled out of the extension rod. The bars are mounted in the same way on top of each other if you need to get higher up for testing or removing detectors.