Engine lock EL754 Hi-O Kit

ABLOY EL754 are motor locks adapted for doors with modular recesses. suitable as night and security locking in doors with high security requirements in commerce, offices and industry. In day-locked or high-frequency doors, EL754 is recommended with a built-in day-lock function in the so-called double-function case. ABLOY EL754 may NOT be used as a fire containment function in fire cell boundary. ABLOY EL754 can be used in doors with automatic swing doors.

The rule and double function falls are powered by the built in motor. ABLOY EL754 is intended to be fitted with a pull handle or pressure plate, if pressure is fitted this will open the day lock function. ABLOY EL754 day/night lock with integrated day lock function, can be used in doors with door automation.

• ABLOY EL754 has two possible locking functions
• – Safety mode, opening speed approx. 0.6 seconds Rule and dual-function case locked, opens with motor or cylinder / knob
• – Day-locked mode, opening speed approx. 0.2 seconds Rule unlocked, double-function case locked, opens with motor, cylinder / knob or push

• The lock can always be opened with a key / knob
• Pressing always opens the day lock function
• Built-in door position sensor (magnet), which can be supplemented with or replaced by an external magnet
• Hold time 4-64 seconds

Control unit DAC630 Hi-O + Relay board 400RC64:

• Functions as an interface to the outside world, e.g. passage or alarm system
• Communicates with the engine lock via encrypted CAN bus
• Requires control signals from parent system to operate engine lock
• Provides indications to the superior system that tell the status of the lock and the door
• Also controls supplementary day locks so that a complete day / night combination is formed
• Activates alarm output in case of malfunction
• Connects to voltage supply
• Must be installed indoors on the protected side of the door within 50m of the motor lock
• If the DAC630 is integrated with the ASSA access system, a fully integrated solution with great flexibility is created

Technical data 

• Voltage: 24 VAC / VDC ± 15%
• Current consumption: rest 330 mA, max 750 mA (0.1 sec)
• Relays: Single-pole switching, max. 50 VDC, 1 A
• Connection cable: EA226 10m, max. distance between motor lock and control unit 50 m
• Door gap: max. 6 mm
• Engine lock: Temp – 20°C – +60°C
• Controller: Temp + 5 °C – + 40 °C, 20 – 90% relative humidity, non-condensing