Panic rule with one-point locking for escape, fire and smoke separation doors Used for single doors, the active door for double doors and the passive door for double doors, for single doors 3-point locking.
Properties:
Certified panic device according to EN 1125 for panic devices and also CE marked as an escape product.
Designed panic bar in lacquered aluminum with steel chassis.
Optional width between 330 (430 with micro) -1300mm.
PHB 3104 up to 1000mm door width.
PHB 3105 up to 1300mm door width.
Meets the authorities' requirements for door retention for fire and smoke separation doors.
The same product for both module and narrow profile doors as well as the passive door leaf.
When used on the passive door leaf, the pullman piston is covered by a cover, the bars up and down are connected to the same product. (PHX03, PHX04/05)
3-point locking is also possible on single doors.
Mounted externally on the inside of the door.
Right/left independent.
17mm pullman piston with interlock, to prevent manipulation even from the inside with alarmed doors.
Steel end plate.
Function:
Opens by pressing the bar in the direction of escape.
Opens with a light pressure even with high door loads, while the closing friction is minimal thanks to the design of the pullman piston.
Can be supplemented with external pressure, also lockable pressure see PHT.
Also suitable for narrow profile doors.
Can be equipped with a microswitch for e.g. alarm indication.
Mechanical setup is included as standard.
NOTE.
the set-up is easily dismantled when used on fire- and smoke-separating doors.
CR123A Battery 3V - 1500 mAh Lithium 
