Test kit Testifire 20 – 7.3 m (Heat / CO / Smoke) – Bags

Test kit with Testifire 2001, Solo 108, 3 x Solo 101, TS3 and Solo 610. For test height approx. 7.3 m.

Detector tester Testifire 2001 for smoke, CO and heat detectors

Heat is generated through a heating element and a fan that blows the air from the side into the detector being tested.

Smoke is generated from the cartridge when a glycerol gel is heated. This type of smoke is the closest we can get to real fire smoke without burning!

CO (carbon monoxide) is generated with the help of a carbon-treated belt that is heated.

Solo 108 – Telescopic pole 2.5 m

Solo 108 is a telescopic pole that is made of a high-quality, non-electrically conductive fiberglass material. It is both light and stiff, which facilitates high testing heights. The various Solo tools can easily be mounted on top of this test rod.

How is the Solo 108 used?

1-3 pcs. Solo 101 can be mounted on top of Solo 108 for a total testing height of approx. 7.3 m.

The Solo 108 telescopic pole is used together with our other test equipment and take-down tools. The following equipment can be used:

• CO and Smoke Detector Tester Solo 330 and Solo 332 (model for larger detectors)
• heat detector testers Solo 461 and Solo 424
• detector remover Solo 200
• universal tester Testifire 1001 and Testifire 2001

The units above are mounted on the test bar simply by sliding the unit into the test bar until it clicks and it automatically locks securely. To separate unit and test rod, the locking button is pushed in and the unit is pulled out of the extension rod. The bars are mounted in the same way on top of each other if you need to get higher up for testing or removing detectors.

3x Test rod extender - Solo 101

Test rod extension of 1.13 m. Solo 101 is an extension rod that is made of a high-quality, non-electrically conductive fiberglass material. It is both light and stiff, which facilitates high testing heights. The various Solo tools can be easily mounted on top of this extender.

How is Solo 101 used?

1-3 pcs. Solo 101 can be mounted on top of each other and they can also be assembled with either Solo 108 or Solo 100 for a total testing height of approx. 7.3 m or approx. 9.3 m.

Extension rod Solo 101 is used together with our other test equipment and takedowns.

The following equipment can be used:

• CO and Smoke Detector Tester Solo 330 and Solo 332 (model for larger detectors)
• heat detector testers Solo 461 and Solo 424
• detector remover Solo 200
• universal tester Testifire 1001 and Testifire 2001

The units above are mounted on the test bar simply by sliding the unit into the test bar until it clicks and it automatically locks securely. To separate unit and test rod, the locking button is pushed in and the unit is pulled out of the extension rod. The bars are mounted in the same way on top of each other if you need to get higher up for testing or removing detectors.

Smoke cartridge Testifire TS3

TS3 is the smoke cartridge used in the Testifire 1001 and Testifire 2001. It contains a glycerol gel as heated and then emits a smoke which effectively activates both optical and ionizing smoke detectors. The leaves no residue remaining in the detector when it has been vented out and is harmless to the environment. This is so close to real fire smoke we can come without setting anything on fire! It can generate smoke too approx. 1000 samples which corresponds to approx. 3 bottles of test gas.

Storage bag - Solo 610

The Solo 610 consists of two bags in black synthetic material in which testers, battery rods, take-downs, gas bottles, cassettes, battery testers and the respective rods can be stored and transported. In the large bag, there are two removable partitions that can be adapted to what needs to be transported.

What can fit in the Solo 610?

The bag has room for e.g. the following Testifire products:

• Testifire 1001 or Testifire 2001
• battery charger Solo 726
• in the lid there is room for 2 battery sticks, Solo 770 (and Solo 760 discontinued product)
• the Solo 200 take-off can fit in the pocket on the front
• smoking cartridges Testifire TS3
• CO cartridges Testifire TC3
• single SmokeSabre
• the battery tester cell checker

The following sample rods can be transported in the quiver included in the Solo 610:

• 1 pc. telescopic pole Solo 100 or Solo 108
• 3 pcs. extension pole Solo 101